Dynemech Machine Leveling & Precision Mounting Solutions Series DLKR 03

SCREW SUPPORT MOUNTS , Series DLKR

Series DLKR

Dynemech Machine Base Mounts Series DLKR are simple but  effective rectangular vibration dampers for machines with respective holes in the base. 

With their sturdy construction, Series DLKR  supports both low frequency attenuation and stable precise machine levelling .

The DLKR Series of vibration damping and leveling mounts provide fast and easy installation of machines along with large rectangular area support.

Series DLKR  machine mounts provide enhanced component finish/part tolerance and extend tool and machinery life of all industrial and workshop equipment and machinery.

DLKR series Anti-vibration mounts have steel body and are used for machines having mounting holes in the base. This leveling mount has a cover plate and dimpled bottom plate holding the insulation plate.

 Leveling is done by tightening the bolt which lifts the cover plate with the machine foot. 

The vibration dampening base pad is made of composite elastomeric material at varying composition contributing different natural frequencies to provide vibration damping solutions to all types of industrial machines. 

These vibration isolation base pads  are resistant to water, almost all the coolants, chemicals, fuels, lubricating oils used in the modern machine shop. 

Series DLKR  vibration insulating machine pads will not deform plastically, if the weight of the machine does not exceed maximum load value defined..

• 

Note- GST and Freight Charges are not included.